GENERAL DESCRIPTION
DRY QUICK is a concentrated
liquid rinse additive which reduces rinse-water surface ten
sion, providing rapid sheeting action for spot free drying. The
excellent sheeting action of DRY QUICK helps eliminate alka
line and hard water film deposits from flatware, glasses and
dishware. In addition, DRY QUICK controls foam thereby
improving the performance of the dishmachine pump. DRY
QUICK is formulated to attain excellent results in soft to me
dium hard water conditions.
PROPERTIES
Chemical composition . . . Organic, nonionic wetting agents
Appearance . . . . . . . . . . . . . . . . . . . . . . Clear blue liquid
pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Specific Gravity . . . . . . . . 1.0030 (8.5 pounds per gallon)
Wetting Ability . . . . . . . . . . . . . . . . . . . .Instant, complete
Foam . . . . . . . . . . . . . . . . . . .Acts as a mild suppressant
Odor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not residual
INSTRUCTIONS FOR USE
DRY QUICK is recommended for use at a concentration be
tween a minimum of 100 ppm (1:10,000) and a maximum of 300
ppm (1:3,000). The actual use concentration is determined by
the individual operating conditions. DRY QUICK may be used at
concentrations as low as 50 ppm (1:20,000) under ideal water
conditions consisting of low water hardness and low dissolved
solids levels. For optimum results, install the rinse injection fit
ting as far back in the line from the rinse jets as possible. This
allows thorough mixing of DRY QUICK with the water supply
before it emerges from the final rinse jets. Final rinse tempera
ture should be maintained as close to the 180o F (82 oC) mini
mum as possible, and should not exceed 190o F (87 oC) in any
case. Check the final rinse pressure and set at manufacturer’s
recommended level. Also, inspect final rinse for spray atomiza
tion. Adjust the rinse injector to feed DRY QUICK at the re
quired concentration to achieve the rapid sheeting of water from
the ware.
HANDLING PRECAUTIONS
CAUTION – FIRST AID
EYES: Flush with water for at least 15 minutes. If irritation per
sists, obtain medical attention. SKIN: Wash with plenty of water
for 15 minutes. If irritation occurs and persists, obtain medical
attention. INHALATION: Remove from exposure. If discomfort
occurs and persists, obtain medical attention. INGESTION:
Drink water to dilute. Obtain medical advice by phone. DECON
TAMINIATION PROCEDURE:
Wash with soap and water.
WARNING: Do not store near oxidizing material.
KEEP OUT OF REACH OF CHILDREN
PACKAGING:
4 /1 gal plastic bottles – 35 lbs net/38 lbs gross
5 gal plastic pail – 43 lbs net/46 lbs gross